How To Enable Disk Controller in BIOS Windows10

Well recently i am trying to install windows 10 pro on my new Dell INSP-55701, i face hurdle which cause me in ending my Installation of Microsoft win 10, if i go with head to toe than error was like this.

Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu.

Before applying this solution i would recommended you to see my laptop specs, so there would be no doubts in it while installing windows 10.
Solution:

1: Press F12 while booting for BIOS if you are using same laptop as mine, if you are using some other vendor machine than follow them.
2: Go to "System Configuration".
3: Under "System Configuration" Click On SATA Operation.
4: On your Right Side Window you have to choose AHCI.
5: Apply these Changes and your life will be easier for a while.

How To Enable Disk Controller in BIOS Windows10

Here below are the specs of my laptop (Dell Inspiron 55701 SIL ARB) and i am going to share with you folks, if you need any help regarding computers and windows solutions you may ask us freely because i am very good with both things.

Processor: 8th Generation Intel(R) Core(TM) i5-8250U Processor (6MB Cache, up to 3.4 GHz)
Memory: 4GB DDR4, 2400MHz.
HDD: 1TB 5400 rpm SATA Hard Drive.